Strain clamps manufacturers said that the design of fixtures is generally carried out according to the specific requirements of a certain process after the machining process of the parts is formulated. When formulating the process, the possibility of fixture realization should be fully considered, and when designing the fixture, if necessary, the process can be modified. Strain clamps manufacturers believe that the design quality of tooling fixtures should be measured by whether the processing quality of the workpiece can be stably guaranteed, high production efficiency, low cost, convenient chip removal, safe operation, labor saving, and easy manufacturing and maintenance.
Basic principles of Strain clamps manufacturers designing tooling fixtures:
1. Satisfy the stability and reliability of workpiece positioning during use;
2. There is enough load-bearing or clamping force to ensure the processing of the workpiece on the fixture;
3. Satisfy the simple and fast operation in the clamping process;
4. Strain clamps manufacturers believes that the vulnerable parts must be a structure that can be quickly replaced, and it is best not to use other tools when conditions are sufficient;
5. Satisfy the reliability of repeated positioning of the fixture during adjustment or replacement;
6. Strain clamps manufacturers stated that it is necessary to avoid the complicated structure and high cost as much as possible;
7. Use standard parts as component parts as much as possible.
